Rust Stains Surfaces Like Shingles, Stucco, Brick, Concrete, Etc... - Certified SoftWash Roof Cleaning

Tim Teed · SoftWash Systems 5-Star Professional

Rust Stains Surfaces Like Shingles, Stucco, Brick, Concrete, Etc...

Michael Derose · SoftWash Systems Certified Applicator

RE: Rust on Stucco

Doug Rucker · UAMCC Officer

One Restore Eaco Chem. Pre wet those shingles really well, then follow your run off with water and water and soap.

-- Edited by Doug Rucker on Wednesday 2nd of May 2012 06:33:18 AM

AC Lockyer · Administrator

Rust that derives from iron oar in water like irrigation rust is easily cleaned with a light acid solution. However.......

Rust that derives from rusting metals like,

Flashing
Cars
Patio Furniture Feet
BBQ Grills
Chimney Caps
and any other metal piece that is left on or around a surfaces...

These stains are often not removable. They can be lightened with chemicals and or completely removed with soda blasting or downright sand blasting. The issue when you get these rust stains on a surface like a shingle roof is that the cleaning method will often damage the shingles / surface. Acids and other chemicals like degreasers can not be used on shingles in any great concentration because they will break down the petroleum in the shingles causing the shingles to literally come apart.

The recommendations above are good ones in moderation. Don't go crazy trying to get a 100% result!!! Be completely satisfied with a 30 to 40% effect.

Use the utmost of caution and remember that some stains are impervious and we can not reverse ageing.

Hope this helps,

AC

John Orrico · SoftWash Systems Authorized Professional

Rust Stains Surfaces Like Shingles, Stucco, Brick, Concrete, Etc...

Matt Lancaster · SoftWash Systems Pro Staff

Did you rinse with nono blaster?

John Orrico · SoftWash Systems Authorized Professional

No I rinsed with a 5 gallon bucket of warm water. I used the portable pump I bought from Paul at SoftWashapooloza. It's the same pump we use for the green wash injector.

I was going to try to powerwash it tomorrow. What are your thoughts?

Matt Lancaster · SoftWash Systems Pro Staff

Seems like Craig uses pressure in all of his videos . Has Craig seen the pics? Do you have hot water unit? Im as curious as you. Keep us updated

Michael Derose · SoftWash Systems Certified Applicator

If a pressure washer dosent work the try a light solution of hydrofloric acid. Its the same stuff you can get at the landscape store. Efflorescence cleaner.

John Orrico · SoftWash Systems Authorized Professional

I have sent them to him haven't heard back yet. I'll post what he says when he calls.

Michael Derose · SoftWash Systems Certified Applicator

Try a light solution with a pump up sprayer. Let sit for 5-10 seconds then rinse off.

John Orrico · SoftWash Systems Authorized Professional

Thanks Mike

Michael Derose · SoftWash Systems Certified Applicator

Do a small spot first. Also try white vinegar also. I would try the vinegar first.

Doug Rucker · UAMCC Officer

Mix up some soapy water, like Dawn, GW may work, spray it on, agitate it in w a broom or brush, and then lightly rinse w a pw'er. Always prewet rust stains and then rinse thoroughly after using any rust remover product w acid in it. Good Luck

John Orrico · SoftWash Systems Authorized Professional

Thank you, Doug

AC Lockyer · Administrator

AC Lockyer wrote:
Rust that derives from iron oar in water like irrigation rust is easily cleaned with a light acid solution. However.......

Rust that derives from rusting metals like,

Flashing
Cars
Patio Furniture Feet
BBQ Grills
Chimney Caps
and any other metal piece that is left on or around a surfaces...

These stains are often not removable. They can be lightened with chemicals and or completely removed with soda blasting or downright sand blasting. The issue when you get these rust stains on a surface like a shingle roof is that the cleaning method will often damage the shingles / surface. Acids and other chemicals like degreasers can not be used on shingles in any great concentration because they will break down the petroleum in the shingles causing the shingles to literally come apart.

The recommendations above are good ones in moderation. Don't go crazy trying to get a 100% result!!! Be completely satisfied with a 30 to 40% effect.

Use the utmost of caution and remember that some stains are impervious and we can not reverse ageing.

Hope this helps,

AC

F9 Barq is doing amazing things for those using it.

AC

Craig Harrison · Sophmore Member

John, did you get this resolved with a light pressure washing?

John Orrico · SoftWash Systems Authorized Professional

Hey Craig,

No I haven't been back to powerwash it yet. Still a little cold here in Michigan. I did go back and scrubbed it with a brush, while it was dry and that did remove some.

Thanks for asking Craig