Removing The Back Seat Of Your Extra Cab For More Room. - Certified SoftWash Roof Cleaning

AC Lockyer · Administrator

Removing The Back Seat Of Your Extra Cab For More Room.

AC Lockyer · Administrator

More in process pix.

AC

AC Lockyer · Administrator

We also added a section of 4" PVC for storing their carbon fiber pole from the UV sun and chems.

AC

Jesse Bracken · Junior Member

Lookin good. Not only will clutter prevent the bed from drying out it will slow your work flow down too! great mod...

John Aloisio · SoftWash Systems 5-Star Professional

If you leave your doors unlocked in Philly overnight they actually do the same thing. Only problem is....the engine and tires will be missing too.

Eric Seitz · Sophmore Member

I was thinking of the same thing. It looks great.

Ray Burke · Community Member

Eric Seitz wrote:
I was thinking of the same thing. It looks great.

yeah, its got me thinking too!

Jeff Newman · SoftWash Systems Authorized Professional

I was just pointing out the packed rear seat area of my cab today to a friend, I have the back seat stored in the up position.....this is a great idea and very useful info..Thank You!

Michael Derose · SoftWash Systems Certified Applicator

Went ahead and did the same thing. I have the eye wash and first aid kit coming In tomorrow. I'm also putting in a bin for paper work ,msds sheets, and other marketing material.

If your going to do this it is fairly easy. The hardest part is getting the seats out. With all fords and most other makes there is 3 clips behind the back seat rest. Take a long screwdriver and push straight down and pull. They will pop right out.

If you have a f250 supercab I have all the dimensions for this build. Bottom is 54 wide 32 long ( from front to back). A 2x4 on the bottom as your support( I have a 2x6 and the front is raised slightly becuase i left the factory subwoofer in,I like loud music). I would also suggest cutting a 1" piece to put directly in the middle of the floor up against the back wall of the truck. The supports are the tether straps from the truck. I bent them at 90 degrees. The uprights are 29 inches high 2x4s. I also used L brackets at the bottom as well. The back board is 29 high x 54 wide.

Then I used 5/8 for the holder moldings around the edges. Front piece=54 long, two side pieces are 32 long. Should take about 2-3 hrs for the whole build from start to finish. This includes taking the seats out. If you need help or have questions give me a call.

List of material needed, 2- 4x8 sheets of plywood or osb board. I used 5/8 osb board.

2- 2x4x8's

2- 1x1x8's

2 inch screws and three L brackets.

3 - 1 1/2 inch lag bolts.

-- Edited by Michael Derose on Wednesday 3rd of February 2016 08:27:13 AM

-- Edited by Michael Derose on Wednesday 3rd of February 2016 08:31:02 AM

-- Edited by Michael Derose on Wednesday 3rd of February 2016 08:32:15 AM

Mario Ciottariello · SoftWash Systems 5-Star Professional

Nice job mike

John Aloisio · SoftWash Systems 5-Star Professional

Good stuff Mike, it looks great!

Tim Teed · SoftWash Systems 5-Star Professional

You should see if Bob Riddick has some shag carpet left. I assume at some point he had a van with water bed in the 70's

Michael Derose · SoftWash Systems Certified Applicator

Thanks tri-state gents.

AC Lockyer · Administrator

Makes a HUGE difference Mike. I noticed you even utilized the bolts the same way. Great job.

AC

Michael Derose · SoftWash Systems Certified Applicator

Thanks AC. I think I layed it out well enough for others to easily do the same if they want.

Michael Derose · SoftWash Systems Certified Applicator

Here is the shot with the eye wash station and first aid kit. I might put up a divider where the eye wash end and move the first aid kit to face you when you open the door. Also I can put my bin for paperwork and msds sheets and everything else we need. I going to go work on that now as a matter of fact.

Bob Riddick · SoftWash Systems 5-Star Professional

That turned out well Mike. You'll love the extra storage space.

Michael Derose · SoftWash Systems Certified Applicator

I have to put down some carpet to stop some of the sliding. Also I think I need some sound damping material between the osb board and the truck wall.

Michael Derose · SoftWash Systems Certified Applicator

Thanks bob.

Troy Layman · Lead Tech

Mike, would carpet really stop the plastic buckets from sliding, or would something like a rubber neoprene work better?

Michael Derose · SoftWash Systems Certified Applicator

Well I have the carpet so I will try that first. If it dosent work than I will most likely rhino line it but I can't do it now becuase that truck is an active plow truck.

Chad Eneix · SoftWash Systems Authorized Professional

Carpet works great. I used the "ribbed" indoor/outdoor runner stuff you cut yourself at Home Depot. Carpet also absorbs water, instead of it running all over, but then dries up fairly fast. It is also easy and cheap to replace. I carpeted the base and the back wall. Gives your truck a little more "pro" look. Customers will see the inside of the truck, too. Many of them are curious enough to look your rig over.

Brandon Vaughn · SoftWash Systems Pro Staff

Funny enough, we've been working on this project as well. I'll post some pics up when my guys are done!